Removing Vacuum Pump
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
The pictures shown in this document may differ from the original.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Installation position of vacuum pump
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Component overview
| 1 |
Vacuum pump |
| 2 |
Fastening screws |
| 3 |
Sealing ring |
| 4 |
Sealing ring |
- Loosen clamp -1-
on vacuum line -2-
for brake booster at the vacuum pump -3-
.
Pull off vacuum line.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Vacuum pump line
- Pull vacuum line -1-
off the vacuum pump -2-
for automatic transmission.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Vacuum supply line
- Remove vacuum pump.
- 3.1 Detach and remove the vacuum pump -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Removing vacuum pump (mechanical)
Remove the vacuum pump -1-
by unscrewing the screws -2-
. Turn the vacuum pump to the side and guide it past the fuel low-pressure line.