Technical Values: Overview
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| No. 1: Holder to hydraulic unit | M6 x 10 thread | Tightening torque | 10 (7.5 ftlb.) Nm | ||
| Fastening screws securing hydraulic unit holder to body | Tightening torque | 5 (3.5 ftlb.) Nm | |||
| No. 1, 2, 3, 6: Brake pressure pipe to hydraulic unit | M10/M12 thread | Tightening torque | 14 (10.5 ftlb.) Nm | +/- 1 (0.5 ftlb.) Nm | |
| No. 4, 5: Brake pressure pipe to hydraulic unit | M12 thread | Tightening torque | 18 (13 ftlb.) Nm | +/- 2 (1.5 ftlb.) Nm | |
| Cap screws for brake lines | M10 x 1 thread | Tightening torque | 14 (10.5 ftlb.) Nm | +/- 1 (0.5 ftlb.) Nm | |
| No. 1: Combination sensor | M6 thread (always replace screws and lock nuts after removal) | Tightening torque | 8 (6 ftlb.) Nm | ||
| Speed sensor to front and rear axles | M6 x 16 thread | Tightening torque | 8 (6 ftlb.) Nm |