LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (42 - Rear Wheel Suspension Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 422119 Removing And Installing Rear Drive Shaft >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS

Location Des... Type Basic val... Toleranc... Toleranc...
No. 1: Threading connection securing drive shaft to wheel hub (1st step) This is done before installing the wheel bearing housing/M24 x 1.5 thread/Always replace lock nut after removal Tightening torque 130 Nm (95.9 ftlb.)    
Pressing out drive shaft -Max.- Length 10 mm + 5 mm  
scientia non olet · About LEMON Manuals