Removing Multi-Functional Switch

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Overview of multi-functional switch

Remove heat shield on the transmission. To do this, unscrew three fastening screws -arrows- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat shield to right side of transmission
Pull off the cable plug on the multi-functional switch.
Remove cap nut, cap, nut with tab washer and rubber washer on the multi-functional switch.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Assembling multi-functional switch
Unscrew fastening screws on the multi-functional switch -arrows- and remove switch.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fastening screws for multi-functional switch