LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (37 - Automatic Transmission - Actuator, Housing (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 371519 Removing And Installing Selector Lever Cable >> Removing Selector Lever Cable

Removing Selector Lever Cable

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the tab washer -1-  off the selector lever cable -A-  .
    G16317461Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Releasing selector lever cable from transmission

  2. Pull the selector lever cable -2-  off the ball joint using > VAS 6933 - Disassembly tool  (-B-  ).
  3. Remove selector support.

    > 370819 Removing and installing selector support - section on  "REMOVING "

  4. Carefully pull the selector lever cable -1-  together with the rubber sleeve -2-  out of the centre tunnel -A-  .
    G16317462Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing rubber sleeve from selector lever cable

scientia non olet · About LEMON Manuals