LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (13 - Engine - Crank Drive, Pistons (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 137419 Removing And Installing Sealing Ring For Crankshaft Pulley >> Removing Sealing Ring For Crankshaft Pulley

Removing Sealing Ring For Crankshaft Pulley

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the four fastening screws and remove the sealing flange with sealing ring.
    1. 1.1 Replace joint flange.
    G16308380Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing cover with sealing ring

  2. Clean the sealing surface of the sheetmetal cover.
scientia non olet · About LEMON Manuals