Drive Shaft
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing drive shaft to front axle transmission flange | M10 thread | Tightening torque | 50 Nm (37 ftlb.) | +90° | |
| No. 1: Threaded connection securing drive shaft to front axle transmission flange | M8 thread | Tightening torque | 20 Nm (15 ftlb.) | +90° | |
| No. 2: Threaded connection securing drive shaft to wheel hub | M24 x 1.5 thread (always replace screws and lock nuts after removal); grease friction surface of the nut with aluminum paste (do not put grease on the thread) | Tightening torque | 460 Nm (340 ftlb.) |