| No. 6: Threaded connection securing lower trailing arm to wheel carrier |
M14 x 1.5 x 100 thread (always replace screws and lock nuts after removal) |
Tightening torque |
150 Nm (111 ftlb.) |
+90 angular degrees |
|
| No. 7: Threaded connection securing lower trailing arm to chassis subframe (front) |
M14 x 1.5 x 110 thread (always replace screws and lock nuts after removal) |
Tightening torque |
150 Nm (111 ftlb.) |
+90 angular degrees |
|
| No. 8: Threaded connection securing lower trailing arm to chassis subframe (rear) |
M14 x 1.5 thread (always replace screws and lock nuts after removal) |
Tightening torque |
170 Nm (126 ftlb.) |
|
|