LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayenne GTS >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - 92A Cayenne >> WM 538055 Replacing Spare-Wheel Well >> Installing Spare-Wheel Well

Installing Spare-Wheel Well

  1. Fit and secure the spare-wheel well.
  2. Weld in the spare-wheel well.
    Fig 1: Identifying Weld In Spare-Wheel Well
    G09939216Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Resistance spot-weld the spare-wheel well.
    2. 2.2. Plug-weld the spare-wheel well using inert gas.
      Fig 2: Identifying Spare-Wheel Well Plug-Weld
      G09939217Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Install lock carrier. → 530955 REPLACING LOCK CARRIER  - section on "Installing"
scientia non olet · About LEMON Manuals