Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Dimension B | Distance | 160 mm | |||
| Dimension C | Distance | 400 mm | |||
| Dimension D | Lower Bolting Point | Distance | 146 mm | ||
| Dimension A (Horizontal From Edge Of Holder) | Distance A | 57.8 mm | |||
| Dimension B (Vertical From Edge Of Side Panel) | Distance B | 17.9 mm | |||
| Spacing Plate To Tail Light Holder | Torque angle | 45° | |||
| Rear Side Panel | Bore A | 8 mm | |||
| Rear Side Panel | Bore B | 20 mm |