Removing Glove Compartment
NOTE:
Voltage peaks
- Risk of damage to load or to the control unit
→ Remove the ignition key and switch off load before disconnecting or removing load.
- Unscrew six fastening screws -1- at the sides, bottom and top.
- Remove glove compartment -arrow- .
- Pull off hose -2- for glove compartment cooling -A- .
- Release electric plug connection -3- for the glove compartment light -a- and disconnect it -B- .
- Disconnect electric plug connection for glove compartment light switch -A- .
- Release electric plug connection for airbag switch -a- and disconnect it -A- .