| Fastening screw securing heat shield to turbocharger |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Banjo bolt for oil supply line |
|
Tightening torque |
15 Nm (11 ftlb.) |
|
|
| Hose clamp on air guide hose |
9 mm wide |
Tightening torque |
3 Nm (2 ftlb.) |
|
|
| Hose clamp on air guide hose |
13 mm wide |
Tightening torque |
5.5 Nm (4 ftlb.) |
|
|
| Fastening nut securing catalytic converter to turbocharger |
Coat with hot screw paste |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Screw on turbocharger |
Turbocharger to connecting tube, rear |
Tightening torque |
30 Nm (22 ftlb.) |
+ 90° |
|