LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (94 - Lights, Lamps, Switches, Exterior -- CARRERA (997)) >> WM 944719 Removing And Installing Hazard Warning Light Switch (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Installing Hazard Warning Light Switch

Installing Hazard Warning Light Switch

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position hazard warning light switch and press it into the air vent.
  2. Push together the electrical plug connections.
    Fig 1: Electrical Connectors
    G09830782Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Observe the line routing and insert the air vent into the dashboard until it clicks into place.
  4. Check function of air vent illumination, air vent adjustment and the hazard warning light switch.
scientia non olet · About LEMON Manuals