LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN) >> WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the wheel bearing needs to be replaced, loosen axle nut (vehicle on ground) while operating the brake (2 fitters required).
  2. Raise the vehicle → WM 4X00IN LIFTING THE VEHICLE (ALL MODELS)
  3. Remove rear wheel → REMOVING WHEEL
scientia non olet · About LEMON Manuals