LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (30 - Clutch, Control -- (981) BOXSTER/CAYMAN) >> WM 303019 Removing And Installing Clutch Slave Cylinder (All Models) >> Installing Clutch Slave Cylinder

Installing Clutch Slave Cylinder

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.
  2. Tighten fastening nut and fastening screw to the specified torque.

    Fastening Nut For Exterior Shift Mechanism: Tightening Torque 23 Nm (17 ft. lbs.) 

    Fastening Screw For Clutch Slave Cylinder: Tightening Torque 23 Nm 

scientia non olet · About LEMON Manuals