LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (34 - Mechanical Gear-Shift System - Actuation, Housing -- (981) BOXSTER/CAYMAN) >> WM 341215 Adjusting Shift And Selector Cables (All Models) >> Adjusting Shift And Selector Cables >> Adjusting The Shift And Selector Cables

Adjusting The Shift And Selector Cables

WARNING: This page is about a different variant/trim than selected.
  1. Make sure that the transmission is in neutral.
  2. Connect Locking Bridge 9846 -1-  to the gearshift bracket -2-  .
    Fig 1: Identifying Locking Bridge 9846 And Gearshift Bracket
    G10024777Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Clip in shift and selector cables -1-  and lock bayonet locks -2-  (-arrows-  ).
    Fig 2: Installing Bayonet Lock Into Shift And Selector Cables
    G10024778Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals