Technical Values: Overview
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic Value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Gearshift Bracket | Countersunk Screw, M6 | Tightening Torque | 8 Nm (6 ft. lbs.) | ||
| Parking Lock Shaft Lever | M6 Fastening Nut | Tightening Torque | 10 Nm (7.5 ft. lbs.) | ||
| Shift And Selector Cable Holder | Collar nut, M6 | Tightening Torque | 10 Nm (7.5 ft. lbs.) | ||
| Drain Plug For Manual Transmission | M22 x 15 - Replace Sealing Ring | Tightening Torque | 40 Nm (30 ft. lbs.) | +/-2 Nm (+/-1.5 ft. lbs.) | |
| Filler Plug For Manual Transmission | M22 x 15 - Replace Sealing Ring | Tightening Torque | 40 Nm (30 ft. lbs.) | +/-2 Nm (+/-1.5 ft. lbs.) | |
| Oil Cooler To Transmission | Aluminum Screws, M6 - Replace Screws - Medium Setting | Initial Tightening + Yield Strength | 2.4 Nm (2 ft. lbs.) | ||
| Disc Valve Holder To Transmission | M6 Screw | Tightening Torque | 13 Nm (9.5 ft. lbs.) | ||
| Holder For Coolant Hoses To Transmission | M6 Screw - Internal Torx | Tightening Torque | 13 Nm (9.5 ft. lbs.) | ||
| Exterior Shift Linkage To Shaft | M8 Fastening Nut | Tightening Torque | 23 Nm (17 ft. lbs.) | ||
| Reversing Light Switch To Transmission | M14 x 1.5 | Tightening Torque | 20 Nm (15 ft. lbs.) | ||
| Transmission Mount To Bracket (MT) | Screw, M8 x 50 With Collar Nut (Conventional Mount) | Tightening Torque | 33 Nm (24 ft. lbs.) | ||
| Adaptive Transmission Mount To Bracket (MT) | Screw, M8 x 75 With Collar Nut | Tightening Torque | 33 Nm (24 ft. lbs.) | ||
| Transmission Bracket To Manual Transmission | Screw, M10 x 55 | Tightening Torque + Torque Angle | 30 Nm (22 ft. lbs.) | +60° |