Glazing, Window Control
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for door window glass | With special tool | Tightening torque | 5 Nm (3.5 ftlb.) | +/-0.9 Nm (+/- 0.5 ftlb.) | |
|
Securing door window |
|||||
| Fastening screw for door window | Directly at the screw | Tightening torque | 12 Nm (9 ftlb.) | +/-1.8 Nm (+/- 1.5 ftlb.) | |
|
Securing door window |
|||||
| Fastening screw for rear side window | Special tool | Tightening torque | 10 Nm | ||
|
Loosening side window |
|||||
| Power window motor to window lifter | Tightening torque | 4.7 Nm (3.5 ftlb.) | +/-0.5 Nm (+/- 0.5 ftlb.) | ||
|
Removing power window motor |
|||||
| Fastening nut for power window | Tightening torque | 9.7 Nm | +/-0.9 Nm | ||
|
Screwing off fastening nuts |
|||||
| Fastening nut securing side window to B-pillar | Tightening torque | 9.7 mm (7.5 ftlb.) | |||
|
Loosening fastening nuts |
|||||
| Fastening nut for rear power window | Tightening torque | 17 Nm | |||
|
Loosening fastening nut for power window |
|||||
| Fastening screw for rear side window | Tightening torque | 9.7 Nm | |||
|
Removing rear side window |
|||||