Removing Cover For Rear Underbody

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cover For Rear Underbody Component Location (Carr. Cabrio, Carr. S Cabrio, Carrera Gts Cabrio, Carr. 4 Cabrio, Carr. 4S Cabrio, Turbo Cabrio, Carr. 4 Gts Cabrio, Turbo S Cabrio)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew fastening screws -2- and fastening nuts -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull off cover -1- at the tabs -arrows- .
Remove cover for rear underbody -1- .