LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (37 Automatic Transmission - Actuator, Housing -- 911 CARRERA (991)) >> WM 377419 Removing And Installing Temperature Sensor (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Removing Temperature Sensor

Removing Temperature Sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull off cable plugs -1-  .
    Fig 1: Pulling Cable Plug On Temperature Sensor
    G09992526Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Screw temperature connector -2-  out of the transmission housing.
    1. 2.1. Clean the sealing face.
      Fig 2: Removing Temperature Sensor
      G09992527Courtesy of PORSCHE CARS NORTH AMERICA, INC.