LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (40 Front Wheel Suspension, Drive Shafts -- 911 CARRERA (991)) >> WM 407719 Removing And Installing Front Anti-Roll Bar (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle → 4X00IN LIFTING THE VEHICLE .
  2. Remove front wheels → 440519 REMOVING AND INSTALLING WHEEL .

    Information 

    Fix the steering wheel with the wheels in straight-ahead position or remove the steering wheel with the wheels in straight-ahead position. If this is not done, the airbag contact unit will have to be moved to centre position after installation of the steering gear.

  3. Position and block the steering wheel and steering column at centre position.
  4. Remove front underbody panelling → 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY .
scientia non olet · About LEMON Manuals