| 20-inch wheels |
130 +2/-0 mm |
| Rear-axle height:
Measure from road contact surface to lower edge of diagonal brace (between the ribs) at wishbone fastening point -arrow-
. |
Permitted transverse inclination of the vehicle: Max. difference in height, left to right = 5 mm Permitted longitudinal inclination of the vehicle: Max. total deviations at front and rear = 10 mm |
| Max. wheel-load difference, right to left, on front axle 10 kg and on rear axle 15 kg. Try for max. 5 kg on the front axle and max. 10 kg on the rear axle. |