Adjusting Shift And Selector Cables

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Make sure that the transmission is in neutral.
Locking bridge 9846 -1- must be fitted on the gearshift bracket -2- .

Fig 1: Identifying Shift And Selector Cable Adjustment Position
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clip in shift and selector cables -1- and lock bayonet locks -2- (-arrows- ).

Fig 2: Turning Bayonet Lock For Shift And Selector Cables
Courtesy of PORSCHE CARS NORTH AMERICA, INC.