LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (40 Front Wheel Suspension, Drive Shafts -- 911 CARRERA (991)) >> WM 405019 Removing And Installing Front Wheel Bearing Housing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", TARGA 4 GTS, CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Tools

WM 405019 Removing And Installing Front Wheel Bearing Housing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", TARGA 4 GTS, CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS): Tools

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Designation Type Number Description  
screwdriver Special tool 9546  
G09992818
press-off tool Special tool 9560  
G09992819
puller set Commercially available tool Nr.87-1 Pos.1  
G09992820
pull stud Commercially available tool Nr.87-1 Pos.2  
G09992821