LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (40 Front Wheel Suspension, Drive Shafts -- 911 CARRERA (991)) >> WM 400919 Removing And Installing Front-Axle Cross Member (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install centre part of cover for centre underbody. → Installing Cover For Centre Underbody .
  2. Install cover for front underbody. → 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY .
  3. Fit front wheels. → Installing Wheel .
  4. Perform suspension alignment and adjust the vehicle.

    → 449503 SUSPENSION ALIGNMENT, COMPLETE .

    → 4495TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENT .

scientia non olet · About LEMON Manuals