LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (47 Brakes- Brake Hydraulic System, Regulator, Booster -- 911 CARRERA (991)) >> WM 477019 Removing And Installing Brake Booster (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition" CARRERA 4 Cabriolet "Edition") >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cover over the brake components (brake booster, brake master cylinder and hydraulic unit). → REMOVING COVER .
    1. Brake fluid reservoir
    2. Brake master cylinder
    3. Brake booster
    4. Hydraulic unit
      Fig 1: Identifying Brake Components
      G09993314Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. Unclip cover at the left and right -arrows-  and remove it.
      Fig 2: Removing Brake Components Cover
      G09993315Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove alarm siren.
  3. Remove brake master cylinder → Removing Brake Master Cylinder  .
scientia non olet · About LEMON Manuals