LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (94 - Lights, Lamps, Switches, Exterior -- CARRERA (997)) >> WM 943319 Removing And Installing Bulb For Rear Light (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS) >> Installing Bulb For Rear Light

Installing Bulb For Rear Light

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

All three bulbs are two-filament bulbs with offset locking pins. Always insert the bulb at the correct position in the bulb holder!

  1. Press the bulbs into the bulb holder -Arrow A-  and turn them -Arrow B-  until the bulbs engage securely in the bulb holders.
    Fig 1: Installing Bulb In Bulb Holder
    G09830762Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert the bulb holders with the bulbs into the rear light -Arrow A-  and lock them -Arrow B-  .
    Fig 2: Securing Bulb Holder With Bulb In Rear Light
    G09830763Courtesy of PORSCHE CARS NORTH AMERICA, INC.