Removing and installing drive motor for headlight beam adjustment: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The adjusting screws for lateral and for vertical and lateral adjustment must not be moved during removal or installation of the drive motor (this changes the adjustment travel). Switch for headlight beam adjustment in position"0".