LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing bulb for auxiliary headlight (high beam headlight) as from model year '02 >> Installing bulb for auxiliary headlight

Installing bulb for auxiliary headlight

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: See INSTALLING BULBS  .
  1. Engage electrical plug connection -arrow-  .
    2. Fig 1: Engaging Electrical Plug Connection & Installing Bulb Holder Into Headlight Housing
    G03063620Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Guide the bulb holder into the headlight housing and turn clockwise on the left headlight and counter-clockwise on the right headlight. Ensure correct seating.
  3. Put the cap -1-  into position and press down until both locking tabs -B-  engage. Screw in both fastening screws -A-  . Tightening torque: 4 Nm (3 ftlb.).
    Fig 2: Installing Cap, Engaging Locking Tabs & Screwing In Fastening Screws
    G03063621Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Install main headlight and perform a function test.
scientia non olet · About LEMON Manuals