LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (48 - Steering -- 987-BOXSTER-CAYMAN) >> WM 481319 Removing And Installing Trim Panel On Steering Column Switch (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S "RS 60 SPYDER", BOXSTER S Black Edition, CAYMAN R) >> Installing Trim Panel On Steering Column Switch

Installing Trim Panel On Steering Column Switch

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install trim panel on steering column switch.
    1. 1.1. Install upper trim panel on steering column switch.
      1. 1.1.1. Insert upper trim panel and connect electric plug connections.
      2. 1.1.2. Press on and lock upper trim panel.
    2. 1.2. Install lower trim panel on steering column switch.
      Fig 1: Locating Lower Trim Panel On Steering Column Switch
      G09587977Courtesy of PORSCHE CARS NORTH AMERICA, INC.
      1. 1.2.1. Engage lower trim panel -2-  on upper trim panel.
      2. 1.2.2. Clip in retaining clip -3-  on lower trim panel -2-  .
      3. 1.2.3. Screw in screws -1-  .
  2. Move steering wheel back to its original position.
scientia non olet · About LEMON Manuals