LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (42 Rear Wheel Suspension, Drive Shaft -- 911 CARRERA (991)) >> WM 421419 Removing And Installing Support Plate (CARR. S CABRIO, CARR. CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO, Gt3, Gt3 RS) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Support plate to diagonal brace and rear-axle cross member Hexagon-head bolt, M8 x 25 Tightening torque 30 Nm (22 ftlb.)    
Support plate to rear-axle cross member Tapping screw Tightening torque 3 Nm (2 ftlb.)    
scientia non olet · About LEMON Manuals