Further To 3: Fitting The Wheel On The Vehicle

Information 

• Never use an impact bolter. 
• Observe the description on wheel removal and installation (fitting wheel on vehicle) →  440519 REMOVING AND INSTALLING WHEEL  . 
• Fit the wheels with the lowest residual imbalance values on the front axle. Observe the rolling direction of the wheels. 

• Fit wheel using a suitable commercially available tool.
• Screw in wheel bolts by hand and then tighten evenly. Start at the top when tightening. Always observe the specified tightening torque of 180 Nm (133 ftlb.).
• Set required tire pressure (tire-pressure plate).