Removing Occupant Detection Control Unit

Fig 1: Identifying Installation Position Of Occupant Detection Control Unit

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Unscrew and remove the two fastening screws -1-  for the occupant detection control unit at the seat console.
   Fig 2: Removing Occupant Detection Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Lift up electric connector at the occupant detection control unit -a-  and disconnect it.
3. Remove occupant detection control unit.
4. Remove padding for right seat → 741055 REPLACING PADDING FOR FRONT SEAT .
5. Remove pressure sensor mat → 741055 REPLACING PADDING FOR FRONT SEAT .