LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (13 - Engine - CRANKGEAR, Pistons 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 136019 Removing And Installing Flywheel >> Installing Flywheel

Installing Flywheel

WARNING: This page is about a different variant/trim than selected.
  1. Block the flywheel. To do this, attach > 9538/1 - 9538/1 toothed segment to a screw hole at the bottom of the oil guide housing so that at least one tooth engages with the ring gear.
    G15197970Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Toothed segment

  2. Fit new screws crosswise. > Initial tightening 60 (44 ftlb.)  Nm and > Final tightening 90°
    G15197971Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    PDK it flywheel

    1  . Flywheel
    2.  Fastening screw
scientia non olet · About LEMON Manuals