LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Panamera Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- PANAMERA (970) >> WM 105519 Removing And Installing Oil Mist Separator (PANAMERA, PANAMERA Turbo, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA GTS) >> Installing Oil Mist Separator

Installing Oil Mist Separator

Fig 1: Overview Of Oil Mist Separator
G09804284Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Engine ventilation/oil mist separator
  2. Molded seal
  3. Molded seal
  4. Screw elements, M6
  1. Check seals on oil mist separator and replace if damaged.
  2. Place oil mist separator in installation position.
  3. Fit oil mist separator evenly onto the valve cover.
  4. Screw in and tighten screws for oil mist separator by hand -2-  . Screws are permanently connected. If screws are damaged, press the screws out of the oil mist separator and replace them.
  5. Fit line connections to the connection pieces on the oil mist separator -1-  . You should hear and feel the lines engage.
    6. Fig 2: Identifying Oil Mist Separator
    G09804285Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals