LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Panamera Base >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 40 - Front Wheel Suspension, Drive Shafts -- PANAMERA (970) >> WM 405019 Removing And Installing Front Wheel Bearing Housing (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Preliminary Work

Preliminary Work

  1. If the wheel bearing housing is replaced (all-wheel drive vehicles only): 

    Remove the relevant hub cap using puller hook 9229/1  and loosen axle nut (lock nut) -1-  before raising the vehicle. Operate the brake while doing this (2 mechanics required).

    Fig 1: Removing Axle Nut
    G09807368Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Raise the vehicle → 4X00IN LIFTING THE VEHICLE .
  3. Remove wheel → 440519 REMOVING AND INSTALLING WHEEL .
scientia non olet · About LEMON Manuals