Removing Suction Fan For Rear Seat Surface

Fig 1: Identifying Rear Seat Surface Suction Fan Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Unclip the seat cover at the rear left and right.
   Fig 2: Pressing Seat Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Turn the rubber hose clockwise (arrow on the rubber is facing the direction in which you are turning the hose) -arrow A-  .
3. Pull the rubber hose off the motor -arrow B-  .
   Fig 3: Pulling Off Rubber Hose

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Unplug electric plug connection.
   Fig 4: Pulling Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Unclip the motor from the four clips and remove it -arrow C-  .
   Fig 5: Removing Motor Clips

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. The rubber hose remains attached to the heating pad.