Installing Locking Mechanism For Rear Backrest
- Position locking mechanism for rear backrest.
- Fit cable holder through the backrest frame and engage it in the guide.
- Screw in rear fastening screws.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw in fastening screws at the front.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Tighten fastening screws to the specified tightening torque. Tightening torque 3.2 Nm (2 ftlb.)
- Screw in fastening screws on retaining bracket for lock and tighten to the specified tightening torque. Tightening torque 5 Nm (3.5 ftlb.)
- Push in headrest support -1-
(-arrow A-
) and clip in the locking lug.
- Position foam part -arrow B-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.