Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Exhaust system holder | M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Exhaust clamp | Maximum inclination | Adjustment value | 10° | ||
| Exhaust clamp | replace; tighten uniformly | Tightening torque | 23 Nm (17 ftlb.) | ||
| Exhaust clamp | Maximum inclination | Adjustment value | 10° | ||
| Connecting strut between rear mufflers | M8 | Tightening torque | 23 Nm (17 ftlb.) |