Cleaning Throttle Housing
WARNING: This page is about a different variant/trim than selected.
WARNING:
Toxic substances
- Danger of poisoning or suffocation
- Danger of burns to the eyes and skin
- Ventilate the work area well.
- Never ingest or inhale.
- Read specific information on the Hazard Sheet.
- Wear personal protective gear.
- Do not smoke, eat or drink in the work area.
NOTIFICATION
Inflammable materials in intake-air distributor
- Risk of engine damage
- Do not insert inflammable materials into the intake-air distributor.
- Remove residues and deposits completely.
- Check that the throttle valve housing > Throttle housing is not contaminated by combustion residues or oil.
- Remove combustion residues and oil using a clean, lint-free cloth and carefully open the throttle valve -arrow-
with your finger.
Soak cloth with solvent naphtha or fuel if necessary.
Throttle housing