LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Panamera 4S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- PANAMERA (970) >> WM 137619 Removing And Installing Vibration Damper (Crankshaft Pulley) (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Removing Vibration Damper >> Assembly Overview - Poly-V-Belt Drive

Assembly Overview - Poly-V-Belt Drive

Fig 1: Overview Of Poly-V-Belt Drive
G09804462Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Poly-V-belt
  2. Screw/replace → Initial tightening: 20 Nm (15 ftlb.) → Final tightening: +90° 
  3. Poly-V-belt pulley for generator
  4. Joint flange on pulley side

    Not shown  - Screw → Tightening torque: 9 Nm (6.5 ftlb.) 

  5. Screw → Tightening torque: 20 Nm (15 ftlb.) 
  6. Poly-V-belt pulley for coolant pump
  7. Coolant pump
  8. Screw → Tightening torque: 9 Nm (6.5 ftlb.) 
  9. Tensioning element for poly-V-belt

    Not shown  - Screw → Tightening torque: 40 Nm (30 ftlb.) 

scientia non olet · About LEMON Manuals