LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Panamera 4S >> Repair and Diagnosis >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame - PANAMERA (970) >> WM 514855 Replacing Centre Side Member (PANAMERA, PANAMERA S, PANAMERA S E-Hybrid, PANAMERA S Hybrid, PANAMERA 4, PANAMERA 4S, PANAMERA Turbo, PANAMERA GTS, PANAMERA Turbo S) >> Subsequent Work >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

  1. Release and remove vehicle from the straightening system.
  2. Clean joint areas and sheetmetal flanges with a wire brush.
  3. Prime joint areas and sheetmetal flanges with 2K primer.
  4. Restore standard seal with body sealant → WM 5X00IN SEAM SEALS

    Also seal the repair area carefully.

  5. Paint repair area and adjacent surfaces, if necessary.
  6. Restore standard underbody protection with underbody sealant → 5X00IN UNDERBODY PROTECTION
  7. Apply standard cavity preservation → 5X00IN CAVITY PRESERVATION . Also carefully apply cavity preservation to the repair area.
  8. Install removed accessories in the repair area.
scientia non olet · About LEMON Manuals