Subsequent Work For Body Repairs (Without Straightening System)
- Prime joint areas and sheetmetal flanges with 2K primer.
- Restore standard seal with body sealant → 5X00IN SEAM SEALS
Also seal the repair area carefully.
- Paint repair area and adjacent surfaces, if necessary.
- Apply standard cavity preservation → 5X00IN CAVITY PRESERVATION
- Install removed accessories in the repair area.
- Prime joint areas and sheetmetal flanges with 2K primer.
- Restore standard seal with body sealant → 5X00IN SEAM SEALS
Also seal the repair area carefully.
- Paint repair area and adjacent surfaces, if necessary.
- Apply standard cavity preservation → 5X00IN CAVITY PRESERVATION
- Install removed accessories in the repair area.