LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (30 Clutch, Actuation -- 911 CARRERA (991)) >> WM 304719 Removing And Installing Guide Sleeve (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo, Turbo S, CARRERA 4 "Edition", Turbo CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition", Gt3) >> Removing Guide Sleeve

Removing Guide Sleeve

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove release lever and release bearing.
    Fig 1: Removing Lever And Bearing
    G09992248Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. -A-  : Press wire spring -3-  in direction of arrow and disengage it.
    2. 1.2. -B-  : Remove release lever -1-  together with the release bearing -2-  .
  2. Unscrew fastening screws -1-  .
    Fig 2: Identifying Screws For Guide Sleeve
    G09992249Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove guide sleeve.
scientia non olet · About LEMON Manuals