Installing Engine Mounting

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Danger of objects or loads falling down

Risk of squashing or crushing

→ Secure components to prevent them from falling down.

Fit engine mounting -1- on engine carrier and at the same time guide the threaded bolt -2- through the bearing eyelet on the engine carrier.

Fig 1: Identifying Vehicle Engine Mounting
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw in and tighten two hexagon-head bolts (M8 x 35; M8 x 65 for active engine mountings) -2- .
Tightening torque 23 Nm (17 ftlb.)
For active engine mountings: Plug in cable plug -3- .

Fig 2: Identifying Left Engine Mounting
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit and tighten M12 hexagon nut -1- on the threaded bolt for the engine mounting.
Tightening torque 85 Nm (63 ftlb.)

Fig 3: Identifying Engine Carrier Mounting
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Lower jack together with transmission jack plate and push out of work area.