WM 405719 Removing And Installing Front Wheel Bearing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS): Tools
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Designation | Type | Number | Description | |
|---|---|---|---|---|
| Pressure piece | VW tool | 30-205 | ||
| Centre the press-on sleeve | Special tool | 9694/3 | ||
| Position the separating device | Commercially available tool | Nr.111 | ||
| test card | Commercially available tool | Nr.147-2 | ||
| press-out mandrel | Special tool | P 297a | ||
| pressure piece | VW tool | T10450 | ||
| pressure piece | VW tool | VW 433 | ||
| pressure piece | VW tool | VW 454 | ||
| holding rails | VW tool | VW 457 |