LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (96 - Lights, Lamps, Switches, Interior -- CARRERA (997)) >> WM 966519 Removing And Installing Alarm Siren (All Models) >> Installing alarm siren >> Installing alarm siren

Installing alarm siren

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position alarm siren -1-  . Insert fastening screw -4-  and counter and tighten the fastening nut -3-  . → Tightening torque: 23 Nm (17 ftlb.)+/-1 Nm (+/-0.5 ftlb.) 
    Fig 1: Installing Alarm Siren
    G09831054Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Push on connector -2-  until it is felt to engage.
scientia non olet · About LEMON Manuals