LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (96 - Lights, Lamps, Switches, Interior -- CARRERA (997)) >> WM 960719 Removing And Installing Contact Switch For Glove Compartment Light(All Models) >> Installing contact switch for glove compartment light

Installing contact switch for glove compartment light

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the door switch for the glove compartment light -1-  and the connector socket -2-  in the mounting points, until they can be felt to engage.
    Fig 1: Pressing Door Switch For Glove Compartment Light And Connector Socket
    G09830974Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Lay the wiring harness and press in the mounting points on the glove compartment -Arrows- 
    Fig 2: Identifying Wiring Harness
    G09830975Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Insert the glove compartment light plug until it is felt to engage.
scientia non olet · About LEMON Manuals