LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997)) >> WM 407819 Removing And Installing Connecting Link (Suspension/Stabilizer) (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO) >> Removing Front Connecting Link (Suspension/Stabilizer) >> Notes

Removing Front Connecting Link (Suspension/Stabilizer): Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel. → 440519 REMOVING AND INSTALLING WHEEL Then loosen the lock nuts -arrows-  on the suspension/stabilizer. When loosening, counter with Torx T30 or open-ended wrench.
  2. Support wheel suspension on wheel carrier with suitable jack, and remove suspension/stabilizer.
scientia non olet · About LEMON Manuals