Tightening Torques For Diagonal Brace
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Diagonal braces to body, M12 x 1.5 | Rear wheel drive | Tightening torque | 100 Nm (74 ftlb.) | ||
| Diagonal braces to front-axle cross member (hexagon nut), M12 x 1.5 | Rear and four-wheel drive | Tightening torque | 100 Nm (74 ftlb.) | ||
| Diagonal braces/crash stop to front-axle cross member, M12 x 1.5 | Four-wheel drive | Tightening torque | 100 Nm (74 ftlb.) | ||
| Crash stop to body, M12 x 1.5 | Four-wheel drive | Tightening torque | 100 Nm (74 ftlb.) |